Print Ready Suede For Jewelry Pouches

Print Ready Suede For Jewelry Pouches
Product Introduction:
WINIW supply print ready suede for jewelry pouches in 0.5 and 0.8 mm, 137 cm usable, in twenty shades, with the pile levelled for foil and screen print. We have spent nine years on the surface a logo lands on rather than the logo itself. We are expecting your bag pattern, the foil your stamper runs and the cord the channel has to take.
Send Inquiry
Description
Technical Parameters
Material Overview
 

A dust bag carries the brand before it carries the product. The mark is usually foil or screen print, and suede is the hardest surface either will meet: the face is a forest of fibre ends, so a die either sinks and closes the letter up, or sits on the tips and flakes at the first rub.

 

Two things decide which happens: how level the pile is after finishing, and how dense the base is underneath.

 

The bag has its own problems: a casing folded over two layers of suede, a cord that has to run, and an edge that must look deliberate.

 

Physical Properties & Specifications
 

 

Item Specification
Material Microfiber suede, PU-impregnated
Thickness 0.5 / 0.8 mm
Usable width 137 cm / 54 in
Pile Short, dense, levelled for print
Print Foil, screen or deboss, trialled on your artwork
Channel Casing fold sized for 3-5 mm cord
Edge Folded and stitched, or raw cut
Colour 20 stock shades, or Pantone lab dip
Crocking EN ISO 105-X12 dry and wet, per order
Abrasion EN ISO 12947-2, per order
MOQ 300 linear meters per colour
Packing 20-30 m per roll, PE

 

 

 

01-drawstring-bag
02-pouch-flat
03-channel-macro

 

 Product Feature
 

 

 

1.Foil needs a bed, not a bush

A dense base under a level pile holds the edge of a stamped letter; a spongy one lets the die sink and closes an eight point logo into a blob.

2.The pile sets the edge of the letter

Long fibre floats the foil on tips and it flakes; short levelled fibre gives the die something to press against.

3.The channel is where pouches fail

A casing over 0.8 mm suede, plus cord, plus two stitch rows, is thick at the eyelet; at 0.5 mm it closes cleanly.

4.A raw edge is a decision.

A hot knife seals the cut but reads darker on a deep shade. If the bag is turned and stitched, say so and we cut with allowance.

 

Contact now

06-features

 

Industry Applications

 
07-application-scenarios
  • Drawstring dust bags. The cord runs through a casing on both sides, so the channel must stay open after washing.

  • Flat envelope pouches. A flat bag is turned inside out, so the allowance must not show through a light shade.

  • Gusseted pouches. The gusset folds twice, and 0.8 mm there decides whether a bag stands or slumps.

  • Printed retail pouches. A foil mark is the first thing checked, and a halo shows at arm's length.

  • Cord-lock pouches. A plastic lock pulls on one point, so the eyelet needs a tab, not a punched hole.

 

Why Source From WINIW Factory?

 

WINIW operates a primary 50,000-square-meter synthetic leather manufacturing facility in Quanzhou, China. We control the entire production chemistry, from the base polyamide extrusion to the final stain-resistant PU finish. Producing over 20 million meters annually, our ISO 9001 certified lines guarantee strict batch-to-batch consistency regarding thickness tolerances, grain patterns, and BS5852 fire retardancy compliance. By partnering directly with our factory, B2B upholstery buyers bypass trading company markups. We provide rapid 7-day OEM color matching, verified REACH compliance reports, and scalable supply chain stability for your furniture production lines.

Ready to upgrade your upholstery material specifications?

Eliminate cutting scrap and warranty claims caused by inferior PU. Request complete technical data sheets (TDS) and free physical A4 swatch books to test our peeling strength and stain resistance on your own factory floor.

(Email: MKT@MicrofiberLeather.com)

FAQ

 

Q:Will foil hold on suede?

A: It will on a levelled pile over a dense base; it flakes on a long pile. Send the artwork and we will stamp a trial first.

Q:0.5 or 0.8 mm for a drawstring bag?

A: 0.5 mm for a channel with two stitch rows; 0.8 mm for a bag that has to stand up in a display.

Q:Will the seam show through a pale shade?

A: A turned bag can telegraph the allowance. Say so and we cut with a wider margin, or you use a bonded rather than stitched seam.

Q:Can it be screen printed instead of foiled?

A: Yes, with plastisol or water-based ink. The pile still has to be levelled, so the same trial applies.

 

Contact now

 

RELATED:

 

Can Microfiber Suede Be Used for Bags?

Color Consistency of Microfiber Leather

Dye Migration in Shoe Leather: A Case Study

 

 

Hot Tags: print ready suede for jewelry pouches, China print ready suede for jewelry pouches manufacturers, suppliers, factory

Send Inquiry