Crease Resistant PU Leather For IPad Pro Smart Covers

Crease Resistant PU Leather For IPad Pro Smart Covers
Product Introduction:
WINIW supply PU leather for iPad Pro smart covers in 0.5 to 0.8 mm, 137 cm usable, in sage, black, sand and navy, on a woven backing that takes a PC shell or a magnet array. We have spent nine years on the hinge rather than the face: the panel that folds thirty times a day and either holds a crisp line or goes white along it. We are expecting your cover drawing, the shell you laminate to and the drop test your market runs.
Send Inquiry
Description
Technical Parameters
Material Overview
 

 

A smart cover does three jobs with one sheet: a hinge that folds flat on itself, a surface against anodised aluminium and glass, and a carrier for the magnet array. Thin enough for the magnets to work through, soft enough not to mark the back, stable enough that the fold stays a line.

 

Physical Properties & Specifications
 

 

Item Specification
Material PU on woven polyester base
Thickness 0.5 / 0.6 / 0.8 mm
Usable width 137 cm / 54 in
Surface Fine pebble, matte, anti-fingerprint
Colour Sage, black, sand, navy; to your standard
Fold tested to your cycle count at the hinge, per order
Abrasion EN ISO 12947-2, per order
Crocking EN ISO 105-X12 dry and wet, per order
Adhesion EN ISO 2411, per order
Lamination to PC or TPU shell, or to a magnet array
MOQ 300 linear meters per colour

 

 

 

02-cover-closed
04-edge-wrap
01-cover-stand

 

 Product Feature
 

 

 

1.The hinge is the test.

A tri-fold panel opens thirty times a day, and a hard topcoat cracks along the fold and turns white. A soft base with a flexible topcoat keeps the crease dark.

2.Magnets through the sheet.

The array sits in the shell, so the sheet must be thin enough that the pull still wakes the tablet. 0.6 mm is the compromise; 0.8 mm starts to cost pull.

3.No ghost on the aluminium.

A migrating back leaves an outline on anodised aluminium after a summer in a bag. Ask for the resistant back and test it against your shell.

4.Edge wrap at 2 mm.

The sheet rolls over the shell edge; at 0.5 to 0.6 mm it turns a 2 mm radius without splitting, at 0.8 mm it lifts at the corner.

 

Contact now

06-features

 

Industry Applications

 
07-application-scenarios
  • Tri-fold smart covers. The two hinge lines, not the face, decide whether the cover survives a year.

  • Folio cases with a pencil slot. The wall beside the pencil is 1 mm wide, and any build-up costs magnetic hold.

  • Keyboard folios. The rear hinge carries the tablet's weight at an angle, so the laminate must not creep at the shell joint.

  • Tablet sleeves. A sleeve is dragged in and out of a bag, where the pebble face hides scuffs a smooth one keeps.

  • Back-panel skins. A skin sits against anodised aluminium for months, where a migrating back leaves a ghost outline on the device.

  • Retail display stands. A stand holds the tablet at a fixed angle under shop light, where matte avoids the glare a gloss throws back.

 

Why Source From WINIW Factory?

 

WINIW operates a primary 50,000-square-meter synthetic leather manufacturing facility in Quanzhou, China. We control the entire production chemistry, from the base polyamide extrusion to the final stain-resistant PU finish. Producing over 20 million meters annually, our ISO 9001 certified lines guarantee strict batch-to-batch consistency regarding thickness tolerances, grain patterns, and BS5852 fire retardancy compliance. By partnering directly with our factory, B2B upholstery buyers bypass trading company markups. We provide rapid 7-day OEM color matching, verified REACH compliance reports, and scalable supply chain stability for your furniture production lines.

Ready to upgrade your upholstery material specifications?

Eliminate cutting scrap and warranty claims caused by inferior PU. Request complete technical data sheets (TDS) and free physical A4 swatch books to test our peeling strength and stain resistance on your own factory floor.

(Email: MKT@MicrofiberLeather.com)

FAQ

 

Q:Will the cover still wake the tablet at 0.6 mm?

A: Yes, and it is where most programmes land. At 0.8 mm the sleep/wake contact weakens, so test the assembled cover, not the sheet.

Q:Will it crack along the fold?

A: A topcoat question, not a thickness one. We fold-test to your cycle count and will say if the hardness will not survive it.

Q:Does it mark anodised aluminium?

A: A migrating back leaves a ghost outline. Specify the resistant back and test it against your shell under pressure.

Q:Can you match our Pantone?

A: Yes, lab dip in 3-7 days, 300 meters per colour minimum.

 

Contact now

 

 

 

Hot Tags: crease resistant pu leather for ipad pro smart covers, China crease resistant pu leather for ipad pro smart covers manufacturers, suppliers, factory

Send Inquiry