Material Overview
A display tray is a shallow box lined with leather. The sheet is die-cut flat, wrapped into the groove at the foot of each wall, and pressed onto MDF or EVA foam. That sequence sets the specification: thin enough to fold without a bulge at the corner, stable enough not to lift back out of the groove, opaque enough that the substrate never shows through a pale colour.
At 0.6 mm you keep the fold and still have a face; at 0.4 mm the grain flattens into paper, at 0.8 mm the corner puckers.
Physical Properties & Specifications
| Item | Specification |
|---|---|
| Material | PU on woven polyester base |
| Thickness | 0.4 / 0.5 / 0.6 / 0.8 mm |
| Usable width | 137 cm / 54 in |
| Weight | approx. 380 g/m² at 0.6 mm |
| Surface | Fine pebble, matte |
| Colour | Mint, cream, black, cobalt, blush; custom to your standard |
| Backing | Woven, plain or barrier-coated for lamination |
| Abrasion | EN ISO 12947-2, tested per order |
| Adhesion | EN ISO 2411, per order |
| Crocking | EN ISO 105-X12 dry and wet, per order |
| UV option | Stabilised face for window displays, per order |
| MOQ | 300 linear meters per colour |
| Packing | 20-30 m per roll, PE |
Product Feature
1.The fold at the groove.
A tray groove is often 2 to 3 mm wide. The sheet must turn that radius without a crease and stay pressed while the adhesive sets. We hold a soft base for this, and will send a one metre strip to fold before you commit.
2.Adhesive that does not print through.
A thin PU on a woven base wicks a water-based adhesive and shows a dark tide mark a day after lamination. Specify the barrier-coated back or run a dry film; both cost less than a rejected tray.
3.Scuff, not just abrasion.
A ring dragged across a tray polishes the face, and on black it reads grey within a season. A pebbled grain breaks the mark; a smooth nappa records every pass. Ask for a scuff swatch in your colour.
4.One set has to be one colour.
A twelve-tray set is cut from several rolls and judged side by side under a shop lamp. Order the set from one lot; we hold the standard so a reorder matches.
5.Window light.
Pink and red move first under UV; mint and cobalt hold. If the display stands in glass, specify the stabilised face.
Industry Applications
-
Ring and earring trays. A ring is lifted and replaced ten times before it sells, so the slot wall takes the most handling.
-
Necklace busts. The sheet wraps over a shoulder curve and must stretch without creasing where the pendant hangs.
-
Watch cushions. A cushion is compressed by the case lid for weeks, so the face must recover, not stay flattened.
-
Box interiors. Interiors are glued to board; adhesive creep shows on the sheet nearest the customer.
-
Window risers. A riser stands in daylight for months: pink and red move first, cobalt holds.
-
Drawer inserts. Inserts are die-cut and dropped in, so the sheet must lie flat unpressed.
Why Source From WINIW Factory?
WINIW operates a primary 50,000-square-meter synthetic leather manufacturing facility in Quanzhou, China. We control the entire production chemistry, from the base polyamide extrusion to the final stain-resistant PU finish. Producing over 20 million meters annually, our ISO 9001 certified lines guarantee strict batch-to-batch consistency regarding thickness tolerances, grain patterns, and BS5852 fire retardancy compliance. By partnering directly with our factory, B2B upholstery buyers bypass trading company markups. We provide rapid 7-day OEM color matching, verified REACH compliance reports, and scalable supply chain stability for your furniture production lines.
Ready to upgrade your upholstery material specifications?
Eliminate cutting scrap and warranty claims caused by inferior PU. Request complete technical data sheets (TDS) and free physical A4 swatch books to test our peeling strength and stain resistance on your own factory floor.
(Email: MKT@MicrofiberLeather.com)
FAQ
Q:Will 0.6 mm wrap a 3 mm groove cleanly?
A: Yes, on a soft base. Send the drawing; under 2 mm we would quote 0.5 mm, and we say so before you order.
Q:Will the adhesive show through a pale colour?
A: It will on a plain back. Specify the barrier coat or a dry film, and test the adhesive your laminator actually uses.
Q:Does black go grey where rings are dragged?
A: A pebble hides it better than a smooth face, but no PU is immune. We send a swatch so you can drag a ring across it.
Q:Can you keep a twelve-tray set in one shade?
A: Order the set together and we cut it from one lot. The standard is retained, so a reorder matches material rather than a photograph.
Q:How close is the colour across repeat orders?
A: Within the approved dip, which we hold for contract accounts. Large panels show shade more than small ones, so approve a full-width panel, not a swatch.
Hot Tags: scuff resistant 0.6 mm pu leather for jewellery display, China scuff resistant 0.6 mm pu leather for jewellery display manufacturers, suppliers, factory
