What Is Synthetic Leather Made Of?

Jul 23, 2024

Leave a message

Synthetic Leather Materials Guide

What Is Synthetic Leather Made Of?

Synthetic leather is usually a layered material rather than one single substance. Most constructions combine a textile or nonwoven substrate with a polymer surface system such as polyurethane (PU), polyvinyl chloride (PVC) or silicone, followed by color, texture and finishing layers designed for the intended application.

Microfiber leather is another important construction: it typically combines a fine-fiber nonwoven substrate with a PU-based system. The backing, polymer, coating structure and finish together determine how the material feels, converts and performs.

Updated: September 2026 Topic: synthetic leather construction Audience: buyers, designers & engineers

Short Answer

Synthetic leather is commonly made from a fabric or nonwoven base plus a synthetic polymer surface. The polymer may be PU, PVC, silicone or another system. Additional layers can include adhesive, foam, pigments, topcoat, embossing and backing. There is therefore no single chemical recipe called "synthetic leather."

Basic Structure

Most Synthetic Leather Has Several Functional Layers

1. Substrate

Woven, knitted, nonwoven or microfiber material provides much of the mechanical base.

2. Impregnation or Bonding Layer

Some constructions use polymer impregnation or an intermediate layer to connect the substrate with the surface system.

3. Polymer Surface

PU, PVC, silicone or another coating forms the visible and tactile face of many synthetic leathers.

4. Color Layer

Pigments and colorants create the required shade and visual consistency.

5. Texture

Embossing, release paper, printing or surface finishing can create grain, matte or other visual effects.

6. Topcoat

A finishing layer can influence gloss, touch, abrasion, cleaning and stain behavior.

The Substrate

What Is the Base Fabric Under Synthetic Leather?

The substrate is important because it influences tear, tensile behavior, flexibility, stretch, dimensional stability, sewing and bonding. Two synthetic leathers with similar surfaces can perform very differently if their substrates are different.

Substrate Type Typical Structural Role Buyer Check
Woven Fabric Provides defined warp and weft strength and relatively controlled dimensional behavior Fiber type, construction, weight, stretch and direction
Knitted Fabric Can provide more stretch and conformability for selected products Stretch, recovery, lamination and dimensional stability
Nonwoven Fabric Creates a fibrous base without conventional woven construction Density, fiber composition, thickness and bonding system
Microfiber Nonwoven Forms a dense fine-fiber structure used in microfiber leather and suede constructions Fiber structure, PU impregnation, density and final thickness
PU Leather

What Is PU Synthetic Leather Made Of?

Typical Construction

  • Textile or nonwoven backing
  • Polyurethane coating or composite layer
  • Pigments and additives
  • Embossed or smooth surface
  • Optional finishing topcoat

What Buyers Should Specify

  • PU construction and backing
  • Thickness and usable width
  • Surface grain and touch
  • Required flex and aging tests
  • Applicable chemical requirements

PU leather can range from lightweight fashion material to technical upholstery or footwear constructions. The term "PU leather" therefore does not by itself define durability, breathability, hydrolysis resistance or service life.

PVC Leather

What Is PVC Synthetic Leather Made Of?

PVC leather generally uses a textile backing with a polyvinyl-chloride-based coating system. Plasticizers, stabilizers, pigments, fillers and other additives can be used to achieve the flexibility, appearance and processing behavior required by a particular article.

PVC Polymer

Forms the main polymer system of the coated surface.

Plasticizer System

Helps control flexibility and should be reviewed against the project and chemical requirements.

Backing

Textile construction affects tear, stretch, handling and dimensional behavior.

Pigments

Create color and can influence light and heat behavior.

Surface Texture

Grain, embossing and gloss are controlled during finishing.

Top Finish

Can influence cleaning, abrasion, gloss and surface feel.

Microfiber Leather

What Makes Microfiber Leather Different?

Microfiber leather is not simply another name for standard PU-coated fabric. Its defining feature is the fine-fiber nonwoven substrate, commonly combined with a PU impregnation or coating system. The substrate can create a dense, integrated structure that differs from conventional textile-backed coated materials.

Feature Conventional PU Leather Microfiber Leather
Base Structure Commonly textile-backed Fine-fiber nonwoven structure
Polymer System PU coating or composite system PU impregnation and/or coating system
Mechanical Behavior Highly dependent on textile and coating Highly dependent on fiber structure, PU system and finish
Buyer Decision Evaluate exact fabric, coating and application Evaluate exact microfiber construction and test evidence
Microfiber construction does not automatically prove a specific abrasion, tear, hydrolysis or flex result. Those properties still need article-specific evidence.
Silicone Leather

What Is Silicone Leather Made Of?

Silicone leather generally uses a silicone-based surface system applied to a textile or other supporting substrate. Its coating chemistry is different from PU and PVC, which can make it useful for projects where buyers want to evaluate a different surface chemistry or cleaning profile.

Typical Elements

  • Supporting substrate
  • Silicone-based surface layer
  • Pigment system
  • Texture or grain
  • Optional backing or laminate

Buyer Checks

  • Cleaner compatibility
  • Heat and light exposure
  • Adhesion
  • Abrasion or flex requirement
  • Current chemical evidence
Synthetic Suede

What Is Microfiber Suede Made Of?

Microfiber suede uses fine synthetic fibers to create a suede-like surface rather than a conventional smooth leather grain. Depending on the construction, the surface may be brushed, raised or otherwise finished to control nap, touch and visual shading.

Fine Fiber Structure

Provides the base for the suede-like surface.

PU System

Can contribute to structure, bonding and final mechanical behavior.

Nap

Brushing and finishing influence direction, touch and shading.

Color

Dyeing or pigmentation determines the required appearance.

Backing

Additional backing or lamination may be used for the final application.

Finish

Application-specific finishing can change grip, cleaning and surface behavior.

Surface Manufacturing

How Does Synthetic Leather Get Its Leather-Like Grain?

1. Surface Formation

Polymer layers are formed on a carrier, substrate or intermediate structure.

2. Color

Pigments or color systems create the required base shade.

3. Texture

Embossing or release-surface technology creates grain and visual detail.

4. Finishing

Topcoat and other finishing steps adjust gloss, touch and surface behavior.

Additives & Finishes

What Else Can Be Added to Synthetic Leather?

The polymer name alone does not describe the complete formulation. Synthetic leather can also contain pigments, fillers, stabilizers, plasticizers, matting agents, adhesion promoters and other formulation-specific components.

Material Component Possible Function Buyer Consideration
Pigments / Colorants Color and appearance Color matching, lightfastness and restricted-substance scope
Plasticizers Flexibility in relevant PVC formulations Formulation, aging and applicable chemical restrictions
Stabilizers Support process or environmental stability Heat, light and chemical requirements
Matting Agents Reduce gloss Surface appearance and abrasion
Topcoat Additives Adjust touch, cleaning or surface response Exact finish and article-specific test evidence
Vegan Leather

Is Synthetic Leather the Same as Vegan Leather?

The terms overlap but should not be treated as automatically identical. "Synthetic leather" describes a manufactured leather-like material, while "vegan leather" is a commercial term normally used to indicate that the product is intended as a non-animal leather alternative.

For B2B purchasing, a "vegan" claim should be checked against the exact composition, supply-chain statement and customer's definition rather than inferred only from the material name.

Bio-Based & Recycled Content

Does "Plant-Based" Mean the Material Contains No Synthetic Polymer?

Not necessarily. Materials marketed with plant-derived, bio-based or recycled content can still contain synthetic polymers, textile substrates, binders or coatings. Buyers should request a composition breakdown and evidence for any claimed recycled or bio-based percentage.

Performance

Does Material Composition Determine Performance?

Composition is important, but it is only the starting point. A buyer cannot predict abrasion, flexing, tear, breathability, hydrolysis, cleaning or weathering from "PU," "PVC" or "microfiber" alone.

Performance Question Main Construction Factors Buyer Action
Abrasion Topcoat, surface layer, substrate and test conditions Compare the same abrasion method and endpoint
Flexing Polymer flexibility, coating thickness, substrate and temperature Define cycles, conditioning and failure criterion
Hydrolysis PU chemistry, moisture, heat and exposure duration Review the exact aging method and article
Breathability Porosity, coating density, perforation and laminate Use a defined WVP, WVTR or air-permeability method
Cleaning Topcoat, polymer chemistry, cleaner and repeated exposure Test the actual cleaner and wipe protocol
Application Selection

Different Products Need Different Synthetic Leather Constructions

Footwear

Flexing, bonding, tear, thickness and upper construction can drive the material choice.

Automotive

Component, lamination, light, heat, cleaning and OEM test methods should guide selection.

Furniture

Abrasion, seam performance, cleaning and tactile requirements are common decision factors.

Bags

Grain, folding, edge finishing, scratch behavior and structure can determine the preferred construction.

Gloves

Grip, flexing, perspiration, thickness and hand feel may dominate the material brief.

Cleaning & Wiping

Absorbency, lint, streaking and wash performance require a different material structure from upholstery.

Buyer Specification

What Should You Ask a Synthetic Leather Supplier?

RFQ Field What to Request Why It Matters
Material Route PU, PVC, microfiber, silicone or another defined construction Prevents generic "synthetic leather" quotations
Substrate Woven, knitted, nonwoven, microfiber or other base Influences mechanical and conversion behavior
Dimensions Thickness, tolerance, usable width and backing Affects cutting and finished construction
Surface Color, grain, nap, gloss and tactile target Defines appearance and finishing route
Performance Named test methods and acceptance criteria Prevents vague claims such as "high durability"
Compliance Destination-market and customer RSL requirements Chemical requirements vary by market and use
Material Selection Support

Not Sure Which Synthetic Leather Construction Fits Your Product?

Share the finished product, component, current reference material, target thickness and usable width, backing, surface appearance, expected service conditions and required test methods. We can use those requirements to narrow suitable material routes before sampling and quotation.

Request Material Recommendation & Sample

Include application, current material or sample, thickness, usable width, backing, color or grain, required tests, quantity, destination and project schedule.

Request Material Recommendation
Buyer FAQ

Synthetic Leather Material Questions

Is synthetic leather made only from polyurethane? +

No. PU is one common synthetic leather system, but PVC, silicone and other polymer constructions are also used. Synthetic leather normally includes a substrate plus the surface polymer and finishing layers.

What is microfiber leather made of? +

Microfiber leather typically uses a fine-fiber nonwoven substrate combined with a PU impregnation or coating system. Its final properties depend on the complete fiber, PU, backing and surface construction.

What is the difference between PU and PVC synthetic leather? +

The main difference is the polymer system. PU leather uses polyurethane-based surface construction, while PVC leather uses polyvinyl-chloride-based coating. Backing, additives and finishing also differ between individual articles.

Is synthetic leather plastic? +

Many synthetic leathers use a polymer surface such as PU or PVC, but the complete material also contains a textile or nonwoven substrate and may include pigments, additives, backing and finishing layers.

Is vegan leather always synthetic? +

Not necessarily as a commercial category. Products described as vegan leather can use different material systems. Buyers should verify the actual composition and the supplier's basis for the vegan claim.

How do I choose the right synthetic leather material? +

Start with the finished component, required thickness, backing, appearance, conversion process, service environment and test requirements. Then compare candidate PU, PVC, microfiber, silicone or other constructions using representative samples and article-specific evidence.

 
Send Inquiry