Light-resistant Microfiber Faux Leather Fabric for Garments

Light-resistant Microfiber Faux Leather Fabric for Garments
Product Introduction:
• Light-resistant microfiber leather for garments
• 0.55–0.70 mm gauges for apparel drape
• 137 cm usable roll width
• ISO 105-B02 lightfastness data listed
• ISO 105-E04 perspiration fastness listed
• >800 g/m²·24h WVP is currently listed
• ≥25 N trapezoidal tear strength listed
• Custom colors for seasonal collections
Send Inquiry
Description
Technical Parameters
Garment Microfiber Leather

Light-Resistant Microfiber Leather for Fashion Garments

Our light-resistant microfiber leather is designed for jackets, coats and fashion panels where color stability must be balanced with thin-gauge drape, perspiration exposure and sewing performance.

The current construction uses a sea-island polyamide microfiber base with a UV-stabilized PU surface. With listed gauges from 0.55 mm to 0.70 mm, the material is positioned for apparel applications where a heavier upholstery-style construction would create excessive stiffness or seam bulk.

Thin-Gauge Drape

0.55–0.70 mm options support garment-panel development.

Lightfast Color

ISO 105-B02 performance is listed for this product.

Perspiration Fastness

ISO 105-E04 Grade 4–5 is currently specified.

Multicolor light-resistant microfiber leather swatches for garments
Orange garment jacket made with microfiber leather
Garment Drape & Construction

Keep the Material Thin Enough for Real Apparel Movement

Garment leather needs to fold around shoulders, elbows, collars and body panels without behaving like a rigid upholstery sheet. Thickness, backing and resin structure therefore affect both appearance and wearer movement.

We recommend evaluating the material as a garment-size panel rather than only as a small hand sample. Hanging, folding and sewing a larger piece gives a more useful view of drape, seam bulk and how the surface behaves after repeated movement.

  • Check drape on a full-size garment panel
  • Evaluate sleeve and elbow flexing
  • Review bulk at overlapping seams
  • Test collar and pocket-edge folding
  • Compare surface recovery after movement
Published Specification

Technical Data for Garment Material Evaluation

The current product listing includes the values below. For bulk purchasing, we recommend connecting the approved physical sample to the applicable TDS and test evidence for the exact color and construction being ordered.

Material Structure Sea-island polyamide base with UV-stabilized PU surface
Listed Thickness 0.55 mm / 0.60 mm / 0.70 mm
Usable Width 137 cm / 54 inches
Lightfastness ISO 105-B02; Grade 5+ is currently listed
Perspiration Fastness ISO 105-E04 Grade 4–5 is currently listed
Water Vapor Permeability >800 g/m²·24h is currently listed
Trapezoidal Tear Strength ≥25 N is currently listed
Wash / Care Requirement Confirm the care method and acceptance criteria for the selected garment construction
Color Development Custom seasonal color matching can be discussed
Wholesale MOQ 300 linear meters per custom color is currently listed
Color Stability

Evaluate Light Exposure on the Actual Fashion Color

Bright whites, pastels, reds and other fashion shades do not necessarily respond identically to prolonged light exposure. Color approval should therefore include the exact production shade rather than relying only on data from another color.

ISO 105-B02

Define the required exposure method, blue-wool reference and minimum acceptable color-change grade.

Shade-Specific Testing

High-saturation and pale colors should be reviewed using the actual production shade when lightfastness is a critical claim.

Retail Display Exposure

Garments intended for store windows or bright display lighting may need a different exposure target from normal indoor apparel.

Appearance After Exposure

Check fading, yellowing, gloss change and surface feel after the agreed light exposure cycle.

Color & Surface Development

Approve Color Together with Grain and Surface Feel

A fashion color cannot be separated from the surface on which it appears. Grain depth, gloss and texture can change the visual result even when two materials use a similar color formulation.

We can review a physical garment swatch, existing leather sample or agreed color standard during OEM development. The final shade should be approved on the same grain, thickness and surface finish planned for bulk production.

Seasonal Colors Fine Grain Matte Finish Soft Hand Feel Thin Gauge Garment Drape
Brown orange and burgundy microfiber leather garment swatches
Blue microfiber leather with textile backing for jacket production
Backing & Sewing

Check Needle Performance Before Approving Bulk Material

Thin garment leather still needs enough seam strength to resist tearing around stitch holes. Needle type, stitch density, seam allowance and feed pressure all affect the finished result.

The current product lists ≥25 N trapezoidal tear strength. For garment development, we recommend pairing that material data with an actual cutting and sewing trial rather than treating one tear value as proof of every seam construction.

  • Test the intended industrial sewing needle
  • Check stitch-hole enlargement after flexing
  • Evaluate seam puckering on thin panels
  • Review edge behavior around pocket openings
  • Confirm seam strength after the intended care process
Wearer Comfort

Breathability Matters More in Full Garment Panels

Water-vapor permeability becomes more relevant when microfiber leather covers a large part of the garment rather than being used only as a small decorative trim.

The current SKU lists water-vapor permeability above 800 g/m²·24h. For performance garments or large jacket panels, buyers should confirm the test method and evaluate comfort together with lining, garment construction and intended climate.

Full Jacket Panels

Larger coverage increases the importance of moisture transport.

Lined Garments

Final comfort depends on both outer material and inner lining.

Performance Trims

Smaller panels may prioritize color and seam performance instead.

Garment Applications

Select the Material by Panel Size and Intended Wear

Fashion Jackets

Balance thin-gauge drape, color stability, sewing and surface feel across large visible panels.

Coats & Outerwear

Larger panels place more emphasis on weight, drape and repeated exposure to outdoor light.

Motorcycle-Style Jackets

High-saturation colors may require closer lightfastness and rubbing evaluation.

Fashion Trims

Pocket, elbow and collar accents can use thinner material with controlled sewing behavior.

OEM Collections

Custom color, grain and thickness can be reviewed against a physical reference.

Garment Care

Set the Care Method Before Making Washability Claims

The current page describes this product as machine washable, but a garment-care claim should include the actual wash temperature, detergent, cycle, drying method and acceptable change in appearance or dimensions.

For an OEM apparel program, we recommend testing the complete garment or representative sewn panel according to the care label you intend to provide to the end user. This allows color, seam integrity, dimensional stability and surface feel to be evaluated together.

  • Define washing or professional-care method
  • Set wash temperature and cycle count
  • Check color transfer after cleaning
  • Measure dimensional change
  • Inspect delamination and surface appearance
OEM Development

From Seasonal Color Brief to Approved Garment Material

1. Define the Garment

Share garment type, panel location, season and destination market.

2. Define the Material

Confirm gauge, color, grain, backing and lightfastness requirement.

3. Sew a Trial

Review cutting, seam behavior, drape and the intended care process.

4. Approve Bulk Criteria

Link the accepted sample to technical, color and QC requirements.

Related Material Options

Compare Garment Microfiber Leather by Performance Priority

Lightfastness is the primary sourcing reason for this SKU. Another garment program may instead place more weight on softness, abrasion resistance, stretch or a different surface character.

Request Garment Microfiber Leather Samples

Send us the garment type, panel location, thickness, color or reference swatch, lightfastness requirement, care method, estimated quantity and destination market. We can review a suitable construction for your development program.

Request Garment Material & Quote
Procurement FAQ

Questions About Light-Resistant Garment Microfiber Leather

What garments can use this light-resistant microfiber leather? +

It can be evaluated for jackets, coats, fashion panels and selected garment trims. The appropriate thickness and construction depend on panel size, desired drape, sewing method and intended wear conditions.

What lightfastness result is currently listed? +

The current product specification lists Grade 5+ under ISO 105-B02. For procurement approval, we recommend checking the actual test report and confirming that the result applies to the exact color and construction being ordered.

Which thickness is suitable for fashion jackets? +

The current SKU lists 0.55 mm, 0.60 mm and 0.70 mm. The final choice should be based on garment-panel size, desired drape, lining, seam construction and the required finished hand feel.

Is perspiration fastness relevant for garment leather? +

Yes, especially for collars, cuffs, elbow areas and garments worn close to the body. The current product lists Grade 4–5 under ISO 105-E04, but the exact test evidence should be matched to the production material.

Can we develop custom seasonal colors? +

Yes. We can review custom color requirements using a physical reference, existing garment swatch or agreed color standard. The final color should be approved on the intended grain, surface and thickness.

What should we provide when requesting a quotation? +

Please provide the garment type, panel location, target thickness, color or physical reference, grain, lightfastness requirement, care method, estimated quantity, destination country and project schedule.

 

Hot Tags: lightfast microfiber leather for garments, light-resistant microfiber leather, microfiber leather for jackets, garment microfiber leather, apparel faux leather, custom microfiber leather, microfiber leather supplier, microfiber leather furniture, microfiber leather bags, leather look microfiber, micro suede leather, microfiber leather vegan, vegan microfiber leather

Send Inquiry