Our automotive interior PVC synthetic leather is available in 0.6–1.6 mm thickness options and a width of 137 cm. It is supplied for car seat upholstery and selected vehicle interior trim, with black, grey and customized color options.
We supply automotive PVC leather for upholstery manufacturers, aftermarket interior specialists and material distributors. Color, grain, backing and performance requirements can be matched to the intended component and approved sample.
Automotive PVC Leather Specifications
| Parameter | Specification |
|---|---|
| Material | PVC Synthetic Leather |
| Brand | WINIW |
| Thickness | 0.6, 0.8, 1.0, 1.2, 1.4 and 1.6 mm |
| Width | 137 cm / 54 inches |
| Colors | Black, grey and customized colors |
| Surface | Selected grain and finish |
| Applications | Car seats and selected automotive interior trim |
| Customization | Color, grain and project-specific material requirements |
| MOQ | 1,000 meters |
| Packaging | 30 or 50 meters per roll; customized packing by agreement |
| Country of Origin | China |
Confirm the usable width, thickness tolerance and backing when preparing your cutting plan or upholstery production specification.
Surface Finish and Material Construction
The PVC coating provides the selected color, grain and surface finish. Material flexibility, surface feel and dimensional stability depend on the coating formulation and backing construction.
Color and Grain
Black, grey and customized colors can be combined with selected surface grains. Production appearance is established through the approved material sample.
Surface Cleaning
The PVC-coated surface can be wiped during routine cleaning. Use cleaning products compatible with the approved finish.
Flexibility and Backing
The selected backing influences handling, dimensional stability and compatibility with cutting, stitching and lamination.
Automotive Interior Applications
Automotive PVC leather can be used for selected vehicle upholstery and trim components when the material meets the relevant application requirements.
Car Seat Upholstery
Seat covers require suitable abrasion resistance, flexibility, seam performance and heat-aging behavior.
Door Panel Inserts
Door trim applications require compatible backing, lamination and forming characteristics.
Armrest Covers
Armrest materials should be evaluated for surface wear, repeated contact and compatibility with the underlying foam.
Interior Decorative Trim
Decorative components require consistent color, grain, surface finish and processing performance.
Explore our automotive synthetic leather solutions for additional vehicle interior materials.
Performance and Testing
Automotive interior materials must meet the specifications of their intended components. Testing requirements vary by vehicle program, application and material construction.
| Property | Testing Considerations |
|---|---|
| Abrasion Resistance | Test under the specified abrasion method, load and cycle requirements. Evaluate the permitted surface changes. |
| Heat and Cold Aging | Check flexibility, surface condition and color after the required temperature exposure. |
| Lightfastness | Evaluate color stability using the applicable light-exposure method. |
| Odor and VOC | Apply the vehicle manufacturer's odor and emissions requirements where applicable. |
| Flammability | Test the relevant material or component construction against the applicable vehicle interior standard. |
| Adhesion and Seam Strength | Check coating adhesion, seam performance or lamination strength according to the intended manufacturing process. |
| Chemical Requirements | Review applicable plasticizer restrictions and customer material specifications. |
For projects requiring FMVSS 302, GB 8410 or another automotive flammability standard, the relevant test results must correspond to the specified material or component construction.
Choosing the Right Thickness
Thickness selection depends on the upholstery component, backing, surface feel and production process.
| Thickness | Selection Considerations |
|---|---|
| 0.6–0.8 mm | Lightweight covering and selected interior trim requiring suitable flexibility and lamination compatibility. |
| 1.0–1.2 mm | Upholstery constructions requiring a balance of material body, flexibility and sewing performance. |
| 1.4–1.6 mm | Thicker upholstery constructions where material body and component compatibility are important. |
Compare samples with the specified backing and surface finish. Thickness alone does not determine abrasion resistance or durability.
OEM Automotive PVC Leather Customization
We support OEM material sourcing for automotive upholstery projects. Color, grain, thickness and backing requirements can be reviewed against your approved sample or technical specification.
Custom Colors and Surface Grain
Provide a physical color swatch or controlled color reference. Select the required grain, gloss and surface appearance according to the available material options.
Material Construction
Specify the target thickness, backing, usable width and processing characteristics.
Project Requirements
Share the applicable automotive material specification, test methods and expected order volume.
Request Automotive PVC Leather Samples
Send us your intended application, target thickness, color reference, surface grain and required quantity. Our team can review suitable material options for your project.
Request Samples & Technical SupportQuality Control and Bulk Supply
Production material is checked against the agreed specification and approved sample. Inspection requirements may include surface appearance, color, thickness, usable width, backing and roll identification.
Our listed packaging options are 30 or 50 meters per roll. Customized packing and delivery arrangements can be discussed according to the selected material and order quantity.
Learn more about our quality control and production capacity.
Frequently Asked Questions
Our listed thickness options are 0.6, 0.8, 1.0, 1.2, 1.4 and 1.6 mm. The suitable thickness depends on the intended component, backing and production process.
Yes. We can review custom color references and surface finish requirements. Available grain options and production specifications are confirmed during sample development.
FMVSS 302 compliance depends on the tested material or component construction. Share your applicable flammability requirements so the relevant material and test evidence can be reviewed.
The listed MOQ is 1,000 meters. Custom colors, finishes and material constructions may have different order requirements.
Send your intended component, target thickness, backing, color reference, surface grain, required test specifications and estimated order quantity. A reference sample can help with material matching.
Related Materials
Get an Automotive PVC Leather Quotation
Tell us your application, thickness, color, grain, required test specifications, order quantity and destination country. We can discuss suitable materials, samples and bulk supply requirements.
Request Samples & a Quote
Hot Tags: automotive interior PVC leather, automotive PVC leather supplier, PVC leather for car seats, automotive upholstery vinyl, custom automotive PVC leather, automotive synthetic leather manufacturer, pvc synthetic leather, polyvinyl chloride leather, pvc leather, pvc synthetic leather for upholstery, pvc imitation leather, polyvinyl leather
